The plumbing courses cover all the aspects that you will be required to deal with as a water quality. You will be taught about the basic aspects as well as about health and safety issues and sanitation.
Turn off the water to the water line repair heater or if the valve is not working turn off the water to the house. If the valve is not working it will need to be replaced. In a future article we will discuss how to replace your valve.
The con to time well spent is only if the fix or installation works. Suddenly, when a pipe is squirting water or the dishwasher is leaking all over the floor, that time seems wasted instead of well spent. Now your time is wasted, plus you have to pay for a professional plumber to come over and fix the mess. That time could have been spent doing something else, like golfing or swimming or gardening.
Depending on your repair job you might need a bucket that will fit below the sink trap, as well as some rags and newspaper. Masking tape is useful for labeling and for wrapping around the heads of the wrench to protect your chrome tap handles. Rubber gloves are recommended, particularly when working with the toilet, but there are greases and glues that you may not want on your hands.
Remove the cap of the faucet using slip-joint pliers. Tape the teeth of the pliers to prevent damage of the surface. Remove the faucet cam washer and water line repair the rotating ball.
To avoid this, make sure your toilets screws are always tight and repair any leaks right away. A new wax ring should also be installed any time the toilet is removed such as if you happen to be replacing an old toilet with a newer model that you liked such as a more modern KOHLER brand. Replacing your toilets wax ring is pretty simple to do and can pretty much be done in less than an hour by the average person.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.